SiRON X220 20pin Cable for Servo Controller Mdr Cables
Giá: Liên hệ
● X220-1S / X220-1 DS applies to 50 p plug servo controller.
● X220-2DS applies to 26 p plug servo controller.
● X220-3S/X220-3DS applies to 20 p plug servo controller.
● Saving wiring time, cooperating with our company terminal modules, make the wiring more convenient and intuitive.
● Please according to PLC and Terminal Block specifications,select the suitable cable.
● Please don’t arbitrarily changed cable internal product.
Cable specification
Cable specification | AWG28 |
Wire constitute | 7/0.127 |
Conductors and insulators material | Conductor:Soft copper wire Insulator:PE |
Twist and polishing | Filling:Cotton thread Wrapping tape:Paper tape |
Appearance condition coating | PVC |
Conductor resistance and insulation resistance | Conductor impedance:Below 239Ω/Kn;Insulation resistance:above 50 Ω2/Kn |
Voltage resistance (air) | AC500V/min |
Example
Notice:The above are standard models. If you need a loose line on the other side, please add “D”after the model. For details, please consult relevant sales staff.
Holes arrangement table
Hole location arrangement plan for SiRON company define the order of the standard, different manufacturers female head side of the hole location order may be different, and when using please pay attention to check.
Port corresponding list
All the products mentioned on the table are owned by SiRON Company, and please refer to the comprehensive catalogue for the relative specifications of T series
Model | Corresponding to CN1 | Corresponding to CN2 |
Brand | Terminal Blocks | |
X220-1S | PANASONICKEYENCE
YASKAWA FUJI DELTA SANYO AB MITSUBISHI |
T064 T234 |
X220-3S | T022 T032 | |
X220-4S | T235 | |
X220-5S | – | |
X220-8S | T232 | |
X220-9S | T233 |
Be the first to review “SiRON X220 20pin Cable for Servo Controller Mdr Cables” Hủy
SẢN PHẨM LIÊN QUAN
Mã sản phẩm:
Mã sản phẩm:
Reviews
There are no reviews yet.