ABOUT SELECTION
![]() |
![]() |
Energy saving
Highlight light beads Intelligent control CE certification |
High brightness lamp beads
High brightness LED chip process small light decay, long service life |
![]() |
||
Model analysis | ||
① | LED signal light series | D014 |
② | Non-smart/smart | Blank:Warning light (Z):RS485 intelligent warning light |
③ | Number of color layers | 1:Single layer 2:Two layers3:Three layers 4:Four layers 5:Five layers |
④ | Working status | Blank:Always on B:Always on with buzzer S:Flashing Q:Hashing with buzzer |
⑤ | Signal polarity | Blank:NPN P:PNP |
Note:
1. D014-1 is single-layer and three-color;
2. light source color can be customized(R-red,Y-yellow,G-green,B-blue,W-white)Example:Custom model D014-4(RYBW)-indicates four layers of signal lights,light source color (from the lampshade top-down)are red,yellow,blue,white.Steady on,NPN is positive.If you need to customize,please contact our sales staff;
3. D014(Z)-3 color layer can only choose 3 layers,light source color can not be customized;
4. D014(Z)-3 working state can only be steady on,D014 total positive bright and shiny with buzzer is not optional;
5. D014(Z)-3 No signal polarity is optional.
Specifications
Model | D014-1 | D014-2 | D014-3 | D014-4 | D014-5 | D014(Z)-3 |
Appearance | ![]() ![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
Luminescent lamp source color |
![]() |
![]() |
![]() |
![]() ![]() |
![]() |
![]() |
Layer number of color | Single-layer three-color |
Two-layers two-color |
Three-layers three-color |
Four-layers four-color |
Five-layers five-color |
Three-layers three-color |
Nominal voltage | 24VDC | |||||
Rated current | Multi-layer multi-color.red 0.07A,yellow 0.09A,green 0.06A,blue 0.06A,white 0.06A Single-layer monochrome:red 0.03A yellow 0.035A,green 0.015A,blue 0.015A,white 0.015A |
|||||
Installation method | Bend | |||||
Working status | Always on/Always on with buzz/flashing/flashing with buzz | Always on | ||||
The material | Light shade ABS+Light shell translucent PC | |||||
Protection grade | IP20 | |||||
Bean Angle | 360° | |||||
Service life | 50000h | |||||
Environment temperature | -25~55℃ | |||||
Signal polarity | NPN common positive electrode /PNP common negative electrode | |||||
Standard wiring length | Standard 1500mm | USB wire length 1000mm |
Intelligent Warning Light Description
Play packet details
Support asynchronous serial port communication mode, through the serial port to receive the command sent by the host computer communication standard (baud rate):9600bps | Format:$SCMDpara1 para2 $O | ||||
$ | CMD | para1 | para2 | $o | |
Data bit:8 | start bit 0×7E | Command word | Parameter 1 | Parameter 2 | End bit0xEF |
Stop bit:1
Check bit:none Flow control:none |
Each command feedback starts with $, That’s Ox7E | Indicates a specification Such as control/ query, etc | Parameter 1 | Lights on or off | End bit0xEF |
Control instruction code
Sent command | 7E AA0100 EF | 7E AA 0101 EF | 7E AA0200 EF | 7E AA0201 EF | 7E AA0300 EF | 7E AA0301 EF | 7E AA0000 EF | 7E AA 0001 EF |
Explain | D1 (yellow light)off | D1 (yellow light)on | D2(green)Off | D2(green light)on | D3(red light)off | D3(red light)on | AIl-OFF | Full open |
For example,if you want to specify turning on a red light (Section 3 light),you need to send 7EAA0301EF return code:Success 00 failure 01 |
Be the first to review “SiRON D014 Series LED Signal Light /RS485 Intelligent Signal Light” Hủy
SẢN PHẨM LIÊN QUAN
Mã sản phẩm:
Reviews
There are no reviews yet.